In this review, we will tell you how to make a cool drum grinder from a conventional electric drill for a garage or home workshop. The machine has compact dimensions, and therefore does not take up much space.
To make the case, the master uses plywood. Also, for work, you will need to prepare wooden slats and bars. By the way, instead of a drill, you can use a motor from an electric blender as a drive, but you only need to somehow fix the cartridge on the shaft.
First of all, from the pieces of plywood, it is necessary to make the basis for the future machine, as well as an inclined platform. It must be attached to the base with 2 furniture hinges.
The main stages of work
In the center of the wooden block, it is necessary to drill a through longitudinal hole. At the ends, the master installs two metal threaded bushings, and then inserts a hairpin. On the edges of the bar mounted housing bearings.
After trying on the bar, you need to give a round shape. Further to the base of plywood, it will be necessary to screw a wooden stand with a mount for an electric drill. The master attaches sandpaper to the drum.
At the last stage, the missing parts are made, after which the master proceeds with the assembly of the entire structure. In addition, it will be necessary to consider a dust removal system during the operation of the machine.
You can watch more details on how to make a drum grinder based on an electric drill in the video on the website.
