VALENTINE IN THE FORM OF A HEART MADE OF PAPER

Send

Valentine's Day has become such a popular holiday that even children celebrate it. They give valentines in the form of hearts to their mothers, grandmothers, friends and girlfriends. But what if there are a lot of friends, and the parents' budget is penniless? Then the hearts can be made of colored paper, especially since each of these hearts can be folded very quickly. Give it a try!
First valentine
Take a rectangular sheet of colored paper and fold one corner in half. Cut off the excess part of the sheet.

Expand. You have a square with a ready-made diagonal fold.

Fold the square along the second diagonal.

Expand.

Bend the upper corner so that it coincides with the center of the square.

Bend the lower corner to the upper bend. Iron the resulting fold.

Fold the right side of the workpiece in half diagonally, aligning the lower fold with the vertical one passing through the middle of the craft.

Fold the left side of the workpiece as well.

Flip to the other side.

Bend the top and side corners inside the crafts as shown in the photo.

Flip to the front. Here is a heart you have succeeded.

Second valentine
For this valentine, prepare a square sheet of colored paper.

Fold in half horizontally.

Expand, rotate the square 90 degrees to either side and fold it horizontally again.

Expand again.

Fold in half the left side of the workpiece, aligning the edge of the square with its vertical fold.

Flip to the other side.

Fold the left side of the workpiece in half again (before folding). You have a narrow rectangle.

Fold the lower and upper parts in half, connecting its edges in the middle.

Expand. You got four horizontal sectors.

Bend the upper and lower sectors horizontally in half.

Return the edges to their original position. Take the scissors and make cuts from the top and bottom vertically to the nearest fold.

Above and below we got two small rectangles.

Bend their sides to the middle. You will get four triangles.

Fold the workpiece in half horizontally.

Fold the bottom of the craft into a triangle, bending the edges to the middle.

Open the sides of the workpiece on both sides and hide the bent parts inward along the bends made.

You will get an almost ready heart.

So that the sides of the craft do not protrude, flip it to the other side and insert the triangles of the upper part of the workpiece into the open triangles of the lower part. And iron the edges again.