To quickly fill the seams between the wall blocks (or bricks), you can make a nozzle on a screwdriver. You can make it from the body of an old aluminum meat grinder, as well as other materials: a plastic nose and a PET bottle.
Whether it makes sense to spoil a meat grinder for the sake of making such a homemade nozzle is a moot point. However, the author believes that using this device is very convenient. However, there is a simpler way - use an empty silicone tube and a gun under it.
Well, now let's look at the process of making a homemade nozzle for a screwdriver and an electric drill. And the first thing you need to cut off all the excess from the meat grinder, leaving only a working chamber with a receiving tray.
The main stages of work
From fiberboard (or other dense material) it is necessary to cut a circle - under the diameter of the outlet of the meat grinder. Then you need to make a small slot in it, as on a steel grate, and also drill five holes.
The fiberboard circle will need to be glued to the back of the plastic nozzle. Then the author begins to assemble the meat grinder: installs the auger and nose, after which it fixes with a clamping nut, which comes with the meat grinder.
And as a result, an almost finished shurik nozzle is obtained. At the last stage, it remains only to expand the receiving tray by putting on it the upper part of the PET bottle. So that she rigidly "sat" in her place, the master warms her with a construction hairdryer.
Then a homemade nozzle is inserted into the screwdriver's chuck, and the receiving tray is filled with a solution, and you can begin to work.
For details on how to make a nozzle for a screwdriver to fill the seams between the wall blocks, we recommend that you look in the video on the website.
